Most people get frustrated when they play Blueprint3D, so here's a list of tips that may help:
Relax mode :
1 - Guide yourself by the words; if the blueprint(picture) seems right, but the words don't, turn it around. Example: semaG romrA = Armor Games
2 - Stay away from the middle; most levels require moving your cursor away from the middle. Try moving the cursor near the corners or sides. (Note: I'd make an example, but I'm not so good with ASCII that I can draw one.)
3 - When the words are correctly spelled, adjust the lines. _______ = ________________ ________ ,or something along these lines...
Final - When words and lines seem correctly positioned try over and over again until you get it right.
Hard mode:
Everything that I said in Relax Mode applies to Hard mode except that you have to hold the left mouse button.
1 - You don't have to release when it's done.
Optional - If you're using a PC, use the mouse next to the key board; Left Hand: hold button. Right hand: Move cursor around.
Stay away from the middle; most levels require moving your cursor away from the middle. Try moving the cursor near the corners or sides. (Note: I'd make an example, but I'm not so good with ASCII that I can draw one.)
